Page 1 of 1
How do I set-up a 2nd computer to access P/C V9
Posted: Thu Sep 15, 2005 7:54 pm
by bobbygmoore
I would like to know where the instructions for setting up a 2nd computer to access the computer thru a wireless modem. The P/C tech indicated
this was a simple process. I let my tech support time lapse and cannot
get additional support at this time. Any help would be appricated.
Bobby G. Moore
FUMC Trenton TN e-mail:
bobbygmoore@bellsouth.net
Re: How do I set-up a 2nd computer to access P/C V9
Posted: Thu Sep 15, 2005 11:41 pm
by NeilZ
bobbygmoore wrote:I would like to know where the instructions for setting up a 2nd computer to access the computer thru a wireless modem. The P/C tech indicated
this was a simple process. I let my tech support time lapse and cannot
get additional support at this time. Any help would be appricated.
Bobby G. Moore
FUMC Trenton TN e-mail:
bobbygmoore@bellsouth.net
I'm assuming you have a wirelsss router setup in your church, as a network ?? If you have the two computers setup so they can see each other on the network, then you need to share the drive and directory on the 1st machine PC+ was loaded on. This will become the 'server' (for lack of a better term). The instructions on how to setup the shared drive are here:
http://www.powerchurch.com/support/answ ... icle_id=33
It was originally written for PC+ v8.5, but the same principles work for v9.0.
If you need additional help, or need some clarification on a step, come on back here and ask away !!
Hope this helps.