Pastor Marshall wrote:We the Eastern Star Baptist Church is attempting to get our ten workers access to Power Church 11.5 and are trying to determine if we can run the software on a NAS Hard Drive or will we have to obtain Server Capability?
You do not need a server to run Powerchurch. The term
server when used in a Powerchurch context simply means the local computer or NAS, where Powerchurch has its directories and data.
To properly run Powerchurch using this method, do the following:
1. Properly
MAP the networked drive on the NAS to your local computer. In many cases to access an NAS drive, you can use the network relative address, but in THIS case you really MUST map the drive to a local drive letter. The shared drive
must be setup to allow all users all permissions (read/write/delete/etc) the program's built-in user permissions program can be used to give access to the various areas.
Here's the basic instructions:
https://www.powerchurch.com/support/35/ ... work-drive
Once that is accomplished, install Powerchurch using the INSTALLATION CD to that mapped drive. If the mapped letter is P: (which I use), then in the installation program change the drive letter from C: (the default) to P:.
The installation program will install the program, and it will appear as a normal program in your Program list, and as a desktop icon. When you restart the program, it will ask you if this is a new install or upgrade. Follow the directions as listed in the PCPlus manual.
Now, to install the program on OTHER networked computers, you
do not use the install disk. You would first map the shared drive to the local computer, then from the
install directory found under the
PCPLUS115 directory, you would click on the
netsetup115.exe[/b] program to start the install on those machines.
Hope this helps.