Username and password do not work

PowerChurch Online is an installation of PowerChurch Plus that resides on our servers, which you access remotely from across the internet.

Moderators: Moderators, Tech Support

Post Reply
pcu55303
Posts: 45
Joined: Mon Mar 08, 2010 7:23 pm
Location: Jacksonville, Fl
Contact:

Username and password do not work

Post by pcu55303 »

I logged on as administrator and then created a username and password with the same rights as the administrator so any changes could be traced back to my account. I logged off the system, restarted the program and entered the new username and password and it says it is invaid....am I missing something?
:wall:
Please visit us at...http://www.htaj.org

Online
NeilZ
Posts: 10209
Joined: Wed Oct 08, 2003 1:20 am
Location: Dexter NM
Contact:

Re: Username and password do not work

Post by NeilZ »

pcu55303 wrote:I logged on as administrator and then created a username and password with the same rights as the administrator so any changes could be traced back to my account. I logged off the system, restarted the program and entered the new username and password and it says it is invaid....am I missing something?
:wall:
Um ... are you seeing the Powerchurch splash screen when you start the program ?? I suspect you're starting the IDS client, and you should use the original Userid and Password given to you.

The Userid and Password you changed are only good within Powerchurch. When it starts up you'll get a dialog with a selection drop down showing the users setup in Powerchurch. When you select your name, you will then enter your password in the space below.
Neil Zampella

Using PC+ since 1999.

pcu55303
Posts: 45
Joined: Mon Mar 08, 2010 7:23 pm
Location: Jacksonville, Fl
Contact:

Re: Username and password do not work

Post by pcu55303 »

i did not have enable passwords checked...sorry, works now
Please visit us at...http://www.htaj.org

Post Reply